-
Save up to 70% of the cost of Oxy-Acetylene
-
R-Gas cut's
steel much cheaper, faster and cleaner than an oxygen-acetylene (oxy/acet)
torch. Our 2000 Liter per hour R-Gas machine costs only $0.60 per hour to
operate! Just add WATER! By comparison, oxy/acet torches can cost over
$50.00 per hour to operate at 2000 Liters/hr.
2. Make all your fuel on site
-
No more Lugging and Storing heavy and dangerous
Tanks of Oxygen, Acetylene or Argon
-
Never worry again about running out of gas
-
No more trouble with nuisance checkups by
regulatory agencies
3. One Piece of
Equipment enables you to Cut Steel, and Weld most metals - Even Aluminum
-
Does not emit ultra-violet light - no eyewear required
-
Cuts
quickly through any thickness without slag
One year manufacturer's warranty on all models
It takes about 4 kWh of electricity to
make a thousand liters of R-Gas per hour (from water). This volume of gas could
supply two cutters or three welding torches.
Metal and ceramic surface coating
with higher deposit rate
Can pay for itself in less than a year.
For comparison, a 100 cubic foot bottle
of Acetylene might cost $22.50, not including any bottle deposits, rental
charges or sales tax.
A R-Gas BN 2000 will produce 106
Cubic Feet of gas in 1 1/2 hours and converting 1.6 liters of water with 12.75
Kilowatts of electricity or $1.53 at .12 per Kilowatt (high average)
The BN 2000 can be leased
for $ 282.07 per month for 60 months.
